Shanghai Y-10 (Redirected from Y-10)
The Shanghai Y-10 was a four engined commercial passenger jet aircraft developed in the 1970s by Shanghai Aircraft Manufacture Factory (now known as Shanghai Aviation Industrial Co., or SAIC). The Y-10 designation stands for Yunshuji ("transport") model 10. The Y-10 is noteworthy in that it was a reverse-engineered design of the Boeing 707 Model 120 with some minor differences. After thawing relations with the West in 1972, China had acquired a Boeing 707 fleet but decided to forge ahead with its own jetliner that was free of dependence on foreign parts, except for the American engine.
The aircraft used Pratt & Whitney JT3D-7 turbofan engines, which were spares belonging to CAAC's small fleet of Boeing 707 aircraft. Shanghai had intended to use a Chinese-built Shanghai WS8 turbofan, but the Pratt & Whitney engine was selected before the WS8 could reach certification. The plane carried 178 in high-density, 149 in economy, or 124 in mixed-class. The flight deck had room for five crewmembers: pilot, co-pilot, flight engineer, navigator, and radio operator.
History
Development work began in August, 1970 for Civil Aviation Administration of China (CAAC). The plane was intended to serve as a demonstrator and help the Chinese industry obtain experience in large aircraft design and flight testing. The Y-10 development totalled 537.7 million yuan. The Chinese government prided itself on the program, citing a foreign press report that said, "After developing this kind of highly complex technology, one could no longer regard China as a backward country!"
Only two examples were built. The first prototype (01) was used for static testing. A second prototype (02) was used for flight testing. The plane first flew on September 26, 1980. Until its retirement in 1984 it made 130 flights with 170 hours of flying time, and visited Beijing, Harbin, Urumqi, Zhengzhou, Hefei, Guangzhou, Kunming, and Chengdu. It also flew seven times to Lhasa in Tibet.
However by the time the prototype was first flown, debate about its viability surfaced. The Y-10 was based on a design that was already 30 years old. It was rumored that CAAC, which already owned a modest Western fleet, would not purchase the plane. China was beginning to embrace trade with the West, and some saw the isolationist design as an inefficient throwback to Maoism. The program was cancelled in 1983, officially due to cost and market concerns. By 1985 SAMF had been granted production licensing for the McDonnell Douglas MD-80 and shifted all efforts towards this program.
Specifications (Y-10)
Shanghai Y-10 profile. (Shanghai Aircraft Manufacture Factory, 1980) General characteristics
- Crew: 9 (5 on flightdeck, 4 flight attendants)
- Capacity: up to 178 passengers
- Length: 42.93 m (140 ft 10 in)
- Wingspan: 42.24 m (138 ft 7 in)
- Height: 13.42 m (44 ft 0 in)
- Wing area:: 244.5 m² (2,630 ft²)
- Empty: 58,120 kg (127,866 lb)
- Loaded: kg ( lb)
- Maximum takeoff: 110,227 kg (242,500 lb)
- Powerplant: 4x Pratt & Whitney JT3D-7 turbofans, 84.7 kN (19,000 lbf) thrust each
Performance
- Maximum speed: 639 km/h (400 mph)
- Range: 8,300 km (5,190 miles)
- Service ceiling: 11,980 m (39,300 ft)
- Rate of climb: m/min ( ft/min)
- Wing loading: kg/m² ( lb/ft²)
- Thrust-to-weight ratio:
References
Related content
Related development:
Boeing 707
Comparable aircraft:
Designation sequence:
|
